Recent Mold Remediation Posts
Mold Cleanup Steps
Water and mold damage in a Moorpark, CA home
Mold Cleanup Steps
Mold cleanup can be a complicated process. If you have house mold in Moorpark, CA, you will likely need to enlist the help of mold remediation specialists. If your problem covers a space smaller than 10 square feet, however, you may be able to address it yourself. To do so, you will still need to follow certain steps. If at any point in the process you discover that the problem is bigger than you can resolve, contact the professionals immediately.
1. Wear Personal Protective Equipment
Before experts start a mold remediation job, they will don several items:
- Protective coveralls
- Face mask with ventilator
- Rubber boots
If you are going to take on a cleanup job yourself, you must also wear protective gear. Try to avoid direct contact with the mold growth.
2. Use Detergent to Scrub
Getting rid of mold requires some elbow grease. Most surfaces can be cleaned with detergent, water and a scrub brush. If an item cannot be scrubbed or if you don’t know how to clean it, leave it to the professionals.
3. Dry Area Completely
It doesn't do any good to get rid of house mold if you leave the moisture that attracted it behind. After the surface is clean, make sure it is also completely dry.
4. Replace Unsalvageable Items
Mold tends to root itself into the pores of the surface on which it grows. If the fungus has infested an item too deeply, that item will need to be thrown out. Mold experts can help you distinguish between items that can be saved and those that must be replaced. If unsalvageable areas are part of the structure, such as walls or ceiling tiles, the work must be done professionally.
No matter the size of the problem, these four steps are essential to getting rid of house mold. If the problem is small, you may be able to clean it, but when in doubt, call the professionals.
Understanding Mold Growth in Commercial Property
Understanding mold in your commercial property is key
Upon noticing the smell or sight of black mold in your Moorpark, CA, business, you probably wonder what caused it to appear. Despite so many different varieties, molds have a single process of growing and spreading. Knowledge of how and why these fungi infest businesses teaches how to prevent them from taking over yours.
Knowing the Water Where Mold Often Grows
Mold needs time, temperature, food, and moisture to thrive. A moisture problem is often the cause of mold growth. Water that gets into building materials, utilities or flooring comes from plenty of sources:
• Burst or leaking pipe
• Flooding from nearby overflowing bodies of water
• Humid weather
• Broken supply line
• Defective sprinkler systems
• Clogged gutter drainage systems
• Defective HVAC systems accumulating condensation
Once identified, any broken utility or component should be fixed by an appropriate professional. This prevents additional water damage and the mold that comes with it.
Preventing Spores From Finding Ideal Conditions
Microscopic spores float through the air looking for a suitable place to settle. Even if the spores are floating in the air of a room, no mold species will grow without a place to settle that has food and water. The parasitic nature of black mold and other organisms means that they can be stopped from being a problem by denying environments they desire.
Treating the Mold That Grows
Proactive water cleanup can prevent the need for mold cleanup. Fixing any existing water damage stops the airborne mold from ever finding a place to survive inside your property.
Contacting a professional water cleanup crew with mold expertise is advised to make sure any water is completely removed with the power of their industrial-grade tools. Additionally, experts can find mold and water hiding in unnoticeable locations that most people miss. This prevents mold from quickly recolonizing.
Getting a Hold on Mold
Black mold may seem daunting at first, but prevention can make it seem like a nonissue. Even if mold does take advantage of a water accident at your property, there are ways to remove it without much hassle.
Which Types of Mold Grow in Houses?
Mold can grow and spread in your Moorpark home if moisture or water is present.
There are many different types and subspecies of mold that may grow in a house. If you have found mold in your home or smell an odor that leads you to suspect the presence of hidden mold, you should contact a certified service that provides testing, clean-up, and restoration services. Skilled professionals can determine whether mold growth poses a risk to any member of the household and limit your family's exposure.
• Aspergillus is a common genus of mold found on food such as bread or potatoes and in HVAC systems. This type of mold is highly aerobic and depends on the presence of oxygen in order to thrive.
• Cladosporium is black or green mold growth that often forms on air ducts, toilets, or painted surfaces in high humidity or when excessive moisture is present.
• Black mold is a type of mold that is known to cause problems for residents in homes with substantial growths. The scientific name for black mold is stachybotrys chartarum. This type of mold should be identified and handled only by mold experts.
• White mold tends to be in the early stages of growth. A reputable service should be able to prevent this type of mold from continuing to grow into mature colonies. White or light grey molds on plants are mildew – a related type of fungus.
These are just a few of the major types of mold growth that you may see in a home in the wake of water damage. You may attempt to identify visible mold in your home, but when it comes to determining the real risk posed by mold and eliminating its presence, you should rely on trained hygienists and remediation experts in Moorpark, CA. These specialists can provide accurate results with either microscopy or culturing and determine the type or subspecies of mold and the best way to eliminate it from your home.
Moorpark/Fillmore/Santa Paula Residents: Follow These Mold Safety Tips If You Suspect Mold
Be careful! Without proper training, you could be spreading microbial growth throughout your home.
If you see visible microbial growth, do not disturb it. You can inadvertently spread the microbial infestation throughout your home. When microbial growth is disturbed, it can release microscopic spores which become airborne and can circulate inside your home.
What to Do:
- Stay out of affected areas.
- Turn off the HVAC system and fans.
- Contact SERVPRO of Moorpark/Fillmore/Santa Paula for microbial growth remediation services.
What Not to Do:
- Don’t touch or disturb the mold.
- Don’t blow air across any surfaces with visible or suspected mold growth.
- Don’t attempt to dry the area yourself.
- Don’t spray bleach or other disinfectants on the mold.
About Our Mold Remediation Services
SERVPRO of Moorpark/Fillmore/Santa Paula specializes in microbial growth cleanup and restoration, in fact, it’s a cornerstone of our business. Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your microbial growth problem quickly and safely.
If You See Signs of Microbial Growth, Call Us Today – (805)529-5600
Does your Moorpark/Fillmore/Santa Paula Home Have A Mold Problem?
In Moorpark/Fillmore/Santa Paula, mold can spread through a home in as little as 48 hours.
Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:
- Mold is present almost everywhere, indoors and outdoors.
- Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
- Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
- Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
- Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
- Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.
If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.
If You See Signs of Mold, Call Us Today (805)529-5600
Hallway shot of all the microbial growth forming.
We think it won't happen to the best of us but then it does, mold attacks! Over the last month and a half our Large Loss Response team has worked around the clock to get this hotel back up and running to fill rooms with visitors. It started when they had a massive water damage through out several floors and since it was so big and the conditions were perfect microbial growth began to form on the walls, in the carpet, and other various places. The hotel could not allow guests to stay because microbial growth is not good for respiratory system when exposed to it. All of our supervised technicians wore proper PPE to clean up the water, get rid of the mold, and remediate the damage.
Mold Remediation FAQ
Ignored water damage led to this mold growing under the sink.
What is the difference between mold and mildew?
The difference between mold and mildew is that they are different types of fungi with different colors and textures. Mildew one of the many types of mold that exist but it is more common in a home which is why you may have heard of mildew previously.
Do I need to hire a mold removal expert or can I do it myself?
Mold is very tricky and when trying to attempt to remove mold you can disrupt it and make it worse than previously. When mold remediation is completed it should be set under negative air and contained with containment barriers and commercial grade antimicrobial to prevent the mold from reoccurring.
It is recommended to follow the IICRC mold removal guidelines which the industry uses as a standard to remove mold correctly.
How long does it take for mold to grow after a water damage?
Mold can start to grow in areas damaged by floods in as few as 24 hours, but it can also take weeks to develop. Labs usually let mold grow for between 48 and 72 hours under ideal conditions before testing. Some materials such as carpeting are known for growing mold quickly. For this reason, it’s important to dry out the area and remediate flood damage quickly.
Microbial Growth Exposure Symptoms
Hidden mold under a sink that went unnoticed causing health problems for the home owners.
Most mold symptoms can be confused with allergy symptoms. Some molds produce toxic substances known as mycotoxins, but mold itself is not poisonous or toxic. Common symptoms can include but are not limited to:
- Runny or stuffy nose.
- Cough and postnasal drip.
- Itchy eyes, nose and throat.
- Watery eyes.
- Dry, scaly skin.
Although bathrooms and basements are typical moist areas prone to mold growth, any moist area in the home can be affected by microbial growth. However this does not exclude other areas such drywall, ceiling tiles, carpets, furniture, ductwork, roofing, paneling, wallpaper, under sinks, and the areas around plumbing pipes.
If you suspect that mold is growing in your home you should always contact a professional. SERVPRO of Simi Valley has trained technicians who will remove any and all mold from your home or place of business. We are the industry leader in mold remediation.
So, What is Microbial Growth? AKA Mold
Without realizing it, this entire home became covered in microbial growth from an ignored water damage.
You may not be able to see or smell it, yet it may be growing in your home and the reason you feel sick. So, what is mold? Molds are multiple types of fungi that grow in filaments and reproduce by forming tiny spores that sprout and fly away, invisible to the naked eye. Mold grows in damp, warm, and humid locations, inside and outside. Mold can grow in your bathroom, in the showerhead, or in the corner near your shower, especially if the room is not well ventilated. Mold can attach to your shoes, pets, clothes, carpets, furniture, books, and papers. Mold can circulate in your air system. Overall, water-damaged buildings create a complicated mixture of contaminants present in the air and dust, resulting in a toxic chemical stew. Additionally, mold produces toxic chemicals called mycotoxins, present on spores and fragments of mold released into the air. Would you believe that half of buildings in the United States are water damaged, leading to the growth of mold? Which means you should always call SERVPRO if you suspect microbial growth in your home or place of business. We have expert technicians and trained office staff prepared to deal with all mold emergencies.
5 of the Most Common Places to Find Microbial Growth
We all know microbial growth in your home is not wanted but do you know where to even begin looking? Mold definitely has it's favorite places to thrive, if you were wondering where they are here are the 5 top places that our technicians have recorded.
1. Basements and cellars after water damage
2. Kitchen and bathroom sinks
3. Your refrigerator
4. Air conditioning units
5. Water Heaters
Now, mold can grow anywhere that gives it a cozy home such as environments that are moist and cellulose. All homes have the key ingredients to house microbial growth, and if you suspect there is mold in your home you should always call the experts at SERVPRO. We have highly trained technicians that are qualified to deal with any and all mold.
4 Simple Ways to Mildew Proof Your Bathroom
In this photo you can see the microbial growing from allowing mildew to grow in the bathroom.
- Paint the walls with Mildew-Resistant paint. Your bathroom walls can and will absorb lingering moisture from a steamy shower which can spur the growth of mildew. Painting your walls with a mildew resistant paint will give your bathroom extra protection.
- Keep your bathroom well ventilated because mildew thrives in damp places. Which can make a bathroom a prime breeding ground.
- Fix any leaks you might find; the tub, the sink, the window. They can all lead to future problems if not assessed quickly.
- Always mop up excess water. After a bath, or shower, or even washing your hands, don’t let standing water stay.
By doing these 4 things you can prevent mildew and microbial growth from entering your home. If you ever suspect mold in your home you should always call SERVPRO for expert experience.
Mold vs. Mildew
Signs are placed at job sites to keep customers out with warning of mold.
Both mildew and mold are types of fungi, and they are both known to be found in the home. They both thrive when there is moisture in the environment and can be difficult to get rid of. Both mold and mildew can be sneaky and spread quickly without homeowners ever knowing they exist. They also each grow on a variety of surfaces from food to your shower and even a single sheet of paper. Mold is a type of fungus that grows in the form of black or green patches and easily penetrates the surface of whatever it is growing on. Mold can even appear as fuzzy or slimy in texture. Mold is typically the result of larger infestation than mildew. Mildew typically grows flat and doesn’t penetrate the surface, making it easier to clean and get rid of. It is typically a patch of gray or white fungus. SERVPRO Moorpark/Santa Paula/Fillmore is your mold experts always reach out to industry professionals if you ever expect mold in your home or place of work.
Things You Should Know About Mold
"Baby" mold spores that you might miss if there wasn't a massive amout in one space.
Here are some things you might not have already known about mold:
Molds can be found almost everywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.
It’s worth noting that not all mold is harmful. In fact, some types of mold can be quite beneficial.
You cannot completely eliminate mold spores in your home, but you CAN prevent mold growth by controlling humidity, keeping areas free of excess moisture, etc.
Typically the mold we see is not the mold that you want hanging around your home, your workspace, or maybe the schools your children attend. Always take mold seriously if you suspect it and call the professionals at SERVPRO.
Your Friendly Neighborhood Mold Busters
This garage was infected with mold for months.
SERVPRO prides themselves on being one of the top mold remediation companies out there. We typically see clients with mold in their homes after significant or long lasting water damage, who ignored their water damage or didn’t know it was happening. Most everyone knows that mold can be hazardous to the health of anyone that comes into contact with it. If you ever suspect mold in your home your best practice should always be to not touch it and call a professional in for an opinion and an action plan. If you or anyone you know is experiencing a mold problem always call your friendly neighborhood mold busters at 818-995-6444. We are a 24/7 restoration and mold remediation company prepared to help you!
No Home is Mold Free
No home is mold free forever but you can take precautions. Soap and detergents can remove mold stains but do not actually kill mold, and any mold that is left behind can quickly regrow. The key to preventing and stopping indoor mold growth is to control excessive moisture and condensation. Keeping susceptible areas in the home clean and dry is critical. Most people have no reaction when exposed to molds. Allergic reactions, similar to pollen or animal allergies, and irritation are the most common health effects for individuals sensitive to molds. SERVPRO of Moorpark/Santa Paula/Fillmore are the mold and mold removal experts in your area. If you suspect mold in your home or workplace you should never hesitate to call. We want to take on your mold problem!
Sometimes Mold Needs to Relax Too
Mold hanging out behind the bar.
Hey, mold works hard. Okay? But not really, mold is sneaky and loves to show up unannounced and uninvited. You should always trust your gut if you start to feel sick and suspect mold is growing in your home. Because if you don't act fast it will grow with mighty speed and then it becomes a larger problem than what you wanted. The experts of SERVPRO Moorpark/Santa Paula/Fillmore want to help you with any mold growth within your home. Our technicians are trained and prepared to handle any amount, large or small. Mold can be finicky and you should always leave it to the pros for your own safety. And next time, don't invite mold to the party. No one wants to go home sick!
This mold was hiding behind cabinets that hadn't been moved in awhile.
This company experienced two water leaks in their roof within a month of each other during a really bad rain season recently. With water damage comes mold, especially in a situation like this where they were hit hard with water in their offices. The mold came quietly and was hard to find, mostly hidden behind cabinets and on the walls behind decorations. It wasn't until our technicians started the water mitigation they realized the bigger problem at hand, mold. SERVPRO of Moorpark/Santa Paula/Fillmore was able to handle the extensive process and remove all the mold that was encasing the office. This before picture shows the mess left behind after all the water damage, we were able to work through the entire process and get the office ready for reconstruction.
Mold Remediation in West Covina
Commercial mold causes a big problem.
In our industry it is common that when water damage occurs and it is not remediated properly, leads to mold growth.
Our company, SERVPRO of Moorpark was called to inspect a 16,000 square foot commercial building that had obtained water damage from the recent Los Angeles rains. The leaks in the roof, went undetected and moisture got trapped in the walls and ceilings. With no way to dry itself out, mold began to grow. A commercial roofer came out to do an inspection and to his surprise there was mold growth. Because the moisture in the roof went undetected for so long, major damage occurred and cost them not only lost revenue but major out of pocket expenses as well.
This is a perfect example of how a simple water damage became a major mold situation in a commercial building.